Solving VCam Hardware Error on Startup
If you’re encountering the Hardware Error message upon launching XSplit VCam, the following guide may help you in solving it.
- Make sure that Windows 10 is updated. Minimum: Version 1803
- Make sure that both your discrete and integrated display adapter drivers are updated.
Deleting Cefcache Folder
Deleting the Cefcache folder is a quick and easy way to bypass the error.
- Logout of XSplit VCam and close the application.
- Open File Explorer on Windows, then copy and paste
%programdata%\SplitMediaLabs\XSplit VCamon the Navigation Bar and hit Enter.
- Delete the cefcache Folder.
- Uninstall XSplit VCam and restart your Computer.
- Reinstall XSplit VCam and run the application as an Administrator by right clicking the Desktop Application icon and selecting Run as administrator.
OpenCL device enumeration crashing on startup causing VCam to prompt with Hardware Error
Hardware detection failure can sometimes happen due to older Intel drivers being left in the OS, even if the current configuration of OS/BIOS does not have an Intel display adapter installed.
Usually this situation can happen if the user disables Intel Integrated Graphics in the BIOS, while while an older driver is installed.
(The latest Intel drivers do not seem to suffer from this issue)
- Open Registry Editor
(Press the Windows key, type
regeditand press Enter)
- Navigate to
- Look for the IntelOpenCL64.dll key
(The actual key name may be slightly different with different Intel drivers, but the key will always end with IntelOpenCL64.dll)
- Change the Value data of the key from
Solution 3 (Optimal)
- Reboot your computer and enter the BIOS settings
The key to be pressed to enter the BIOS settings will be shown upon boot. Commonly F2 or DEL
- Enable Intel Integrated Graphics
Enabling this will vary depending on your motherboard.
This is usually found under the Advanced BIOS settings called IGD Multi-Monitor, iGPU Multi-Monitor or Intel Integrated GPU
Here are examples from the most common motherboard manufacturers:
ASRock: Advanced > Chipset Configuration > IGPU Multi-Monitor > Enabled
ASRock: Advanced > North Bridge Configuration > IGPU Multi-Monitor > Enabled
ASUS: Advanced > System Agent (SA) Configuration > Graphics Configuration > iGPU Multi-Monitor > Enabled
BIOSTAR: Chipset > System Agent (SA) Configuration > Internal Graphics > Enabled
Gigabyte: Chipset > Internal Graphics > Enabled
Gigabyte: Peripherals > Intel Processor Graphics > Enabled
EVGA: Advanced > Graphics Configuration > Internal Graphics > Enabled
MSI: Settings > Advanced > Integrated Graphics Configuration > IGD Multi-Monitor > Enabled
We recommend consulting the user manual for your specific motherboard for more details.
- Save your BIOS settings and reboot your computer
- Once Windows has loaded, install the latest Intel Integrated Graphics drivers.
We recommend using the Intel Driver & Support Assistant.
Even if you initially go with Solution 1, we strongly encourage trying Solution 2 as well.
XSplit VCam is able to use your Intel integrated GPU to offload processing from your main discrete GPU as a bonus.
This is specially true for later-gen Intel processors with quite powerful integrated graphics such Intel HD or UHD 600 series GPUs and above.