Audio Settings

The Audio tab is where you can set which devices XSplit Broadcaster capture audio, set audio capture delay and volume control range as well as enable features such as audio preview and microphone silence detection.

音频预览
Choose an audio playback device to monitor the final audio output from the presentation.
系统声音
Choose an audio playback device that XSplit Broadcaster will capture audio from.
延迟
Enable and set a delay from which XSplit Broadcaster captures audio from the above device.
容量范围 (%)
Allows you to increase the range you can set the System Sound volume on the stage. (Up to 300%)
麦克风
Choose an audio recording device that XSplit Broadcaster will capture audio from.
延迟
Enable and set a delay from which XSplit Broadcaster captures audio from the above device.
容量范围 (%)
Allows you to increase the range you can set the Microphone volume on the stage. (Up to 300%)
静音检测
Enable/disable automatic muting of the microphone within the set threshold and silence period. More information below.
麦克风单声道混音
Sets how audio from a mono microphone source will be distributed to the left and right audio channels.
音频混合采样速率
Allows you to manually select the sampling rate of your final audio output. Useful for those that a specific sampling rate for their recordings or output sources or matching the sampling rate of legacy audio devices that cannot accommodate 48KHz.

静音检测

Enabling microphone silence detection allows you to limit unwanted background noise by automatically muting the microphone. The threshold set allows you to control the minimum volume level of sound to automatically unmute the microphone while the silence period is the amount of time before the microphone is muted again.

To learn more about Silence Detection and how to use it, click here.